Energy crunch is on, fuel prices have hit the roof and they are slated to break through the roof soon. Days are not far when utility companies will jack up the electricity rates to a point where you will have to run for cover. Everybody is looking for ways to install some alternative energy system at home. Solar power system is one of the well loved alternatives. A solar power system comprises of three basic components, apart from the mandatory disconnects and safety accessories:
1. The solar panel;
2. Battery, for storing the energy generated, and necessary charger;
3. Inverter, to convert stored DC power to AC power.
Cost of a solar power system competent of supplying power to all household appliances can be quite substantial and solar panel makes a significant proportion of it. Fortunately the solar power system can be made in a modular fashion; you install the basic requirement and increasingly as the time and the cost permit, carry on adding to it. Your own solar panel can be assembled by you; the other components mentioned above will be procured as required from the local suppliers.

What you need
The actual process of assembling your own solar panel is not very hard. You need a certain amount of guidance on some aspects such as:
How to assess the solar panel power rating to meet your needs Where to buy the solar cells from
How to intersect the cells to take the desired voltage and contemporary capacity
How to assemble the solar panel
How to install the solar panel, etc
There are many guides unfilled to provide such information. These guides cost about $25 to $40. A small search on the internet will get you website addresses at which these guides are unfilled. These guides give step-by-step assembly and installation instructions with pictures/photographs where necessary. Take one of these guides, study thoroughly and now you are ready to get going! To assemble your own solar panel you require the following equipment:
Solar cells
A sheet of plywood of suitable size
Sheets of glass
Copper wires
Few simple tools such as pliers, screwdriver, hand-drill apparatus, a soldering iron (with solder, flux, etc) will be enough.
Solar panel assembly:
? Arrange the solar cells in rows on the plywood sheet, with the back of the cells on the plywood and in the configuration suggested in the handbook book.
? Drill holes in the plywood sheet so that the wires connecting the cells can be taken through to the back. Intersect the cells as per the instructions.
? Place a financial help board on the back of the plywood so that the interconnected wires are held in place and sealed
? Place the sheet of glass over the top of the solar cells
? Place a framing piece over this assembly (as would be done in framing a photograph)
? Seal the edges of the assembly, and your solar panel is ready.
The assembly course of action described above is the basic process of assembling your own solar panel. Of course you can improvise on it so as to make your assembly more sturdy, make it impervious to ingress of dust, water, etc, make it strong so that its installation outdoor will not cause any problems. A self assembled solar panel can bring about a substantial saving. You can save about 50% or more of the cost of solar panel by responsibility your own assembly.
Learn How to Make Solar Panels & Save Up to 80% Electricity Bills. Get the Details Now!

Jenney is a website of homesolarwindpower.com,where you can learn How to Make Solar Panels and Build Wind Generator,then Save Up to 80% Electricity Bills every month.

Related posts:

  1. How To Build A Cheap Solar Panel In 1 Hour FREE Electricity For Your Home
  2. How To Build A Cheap Solar Panel In 1 Hour FREE Electricity For Your Home
  3. How Does A Solar Panel Work – Learn to Build your own Solar Panel
  4. How To Build A Solar Panel At Home – Earth 4 Energy
  5. Solar Panel Diy Make Your Own Solar Panel Build Solar Panels

Like this post? Subscribe to my RSS feed and get loads more!