Energy 4 Earth- Home Made Energy Reviews

What Is The Best Lubricate For A Rubik’s/diy Cube?

Ok So I have a DIY Cube that was already lubricated but, I dropped it in water and alot of the lube came off. So my Question is, What is the best lubricate for a Rubik’s/DIY Cube?

Related posts:

1. How Can I Set Up A Very Economical/ Diy Set Up For Taking High Key Or Fashion Photos?
2. What Kind Of Quality Can I Expect With An $80 Elite Screen For A Home Projector? Am I Better Off With A Diy?

Tags: Best, Cube, Lubricate, Rubik's/diy

This entry was posted on Tuesday, December 1st, 2009 at 5:18 am and is filed under diy. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

3 Responses to “What Is The Best Lubricate For A Rubik’s/diy Cube?”

1. NoOB123 Says:
   December 1st, 2009 at 5:32 am

   CRC heavy duty silicone, it’s very cheap n u can buy it at walmart, don’t use vaseline

2. tabby Says:
   December 1st, 2009 at 5:35 am

   Silicon. It works the best, and it is very cheap and widely availabe. however, you must be very careful about it, else, you run the risk of killing your cube.
   I assume that you already know how to lubricate the cube. take it apart, put some lube on the parts of the cube that turn, though do not over-do it. Next, reassemble the cube in the right order, scramble it and solve it. If it feels fine and you can cut corners on it, then take it apart again without touching the insides of the cube. Leave it to dry. Once it does, put it back together and feel the difference.

3. sMiLeY #10 Says:
   December 1st, 2009 at 6:00 am

   Teflon dry lube or silicone they both come in spray cans silicone would be cheaper but if you use to much it could ruin your cube

Leave a Reply